For a flawless drivetrain
Pinion Original
Accessories
Discover original Pinion accessories, spare parts, and merchandise.
Registered dealers can view details and order parts and accessories using the blue article numbers. End users can purchase Pinion accessories and spare parts from dealers.
Gearbox components
Cranksets for every
Application
Original Pinion cranksets
Crankset Forge 2018
Forged crank arms made of lightweight aluminium in a flat design. Available in 2 lengths.
- Material: EN-AW 6061, black
- Offset: 32 mm
- Q-Factor P-Line: 174 mm
- Q-Factor C-Line: 166 mm, black
P8510 (175 mm)
P8511 (170 mm)
Crankset Forge Boost
Forged crank arms in lightweight aluminium. Available in 170 mm.
- Material: EN-AW 6061, black
- Offset: 36 mm
P8534 (170 mm)
CRankset „CNC“
CNC-machined crank arms made of high-strength aluminium. Available in 6 lengths.
- Material: EN-AW 7075, black
- Offset: 33 mm
- Q-Factor P-Line: 175 mm
- Q-Factor C-Line: 167 mm
P8500 (180 mm)
P8501 (175 mm)
P8502 (170 mm)
P8503 (165 mm)
P8504 (160 mm)
P8505 (155 mm)
Crankset CNC Fatbike
CNC-machined crank arms with offset – especially for use on bikes with particularly wide chainstays, fat, or plus bikes.
- Material: EN-AW 7075, black
- Offset: 52.5 mm
- Q-Factor P-Line: 214 mm
- Q-Factor C-Line: 206 mm
P8530 (175 mm)
Centre Crank Bolt
Centre Crank Bolt (1 pcs.)
P8540
Centre Crank Bolt Set
Centre Crank Bolt (8 pcs.)
P8527
Crank clamp screws set
Crank clamp screws (8 pcs.)
P8523
Hubs perfectly matched
to the application
H3 Hybrid hubs
The H3 HYBRID hub was developed in cooperation with the hub and wheel specialists at DT SWISS®. The H3R is a singlespeed hub optimised for Pinion and is based on the patented RATCHET® freewheel system.
Thanks to HYBRID technology, it is specially designed for use in high load applications. The Pinion H3 hubs feature symmetrical, flat spoke angles and can be used with Longlife chains or Gates® toothed belt drives. The H3 HYBRID hubs use proven DT Swiss technology, no-frills functionality, and require little maintenance. Further information on the H3 HYBRID hubs can be found in the data sheet.
H3.F front wheel hub
32 holes, black anodised
100 mm x 9 mm for Quick release
P7560 (black)
100 mm x 15 mm for Thru axle TA 15
P7565 (black)
H3R Singlespeed rear hub
32 hole, black anodised
135 mm x 10 mm for Quick release
P7060 (black)
135 mm x 10 mm for Thru axle TA 10
P7065 (black)
142 mm x 12 mm for Thru axle X 12
P7070 (black)
Field report H3 Hybrid hubs
The H3 hubs purr quietly in our bikes and and do their job reliably. What more could you ask for? Typical Pinion, a top product for adventure cyclists!”
Sprockets / Ergonomic Gearing Adjustments
Sprocket gear
For more ground clearance while mountain biking we recommend the 24-T sprocket. For touring, we recommend the 30-T sprocket. Available in 2 sizes.
P8124 (24 Teeth)
P8130 (30 Teeth)
Sprocket gear Longlife
Extra-sturdy sprockets with 1 mm wider teeth. Longlife sprockets are designed for use with ½”x 1/8 chains with a total width of up to 8 mm. Use only in combination with X101 Longlife chains.
P8130L (30 Teeth)
Rear sprocket
In combination with large front sprockets, a 1:1 gear ratio can be obtained. Available in 4 sizes.
P8222 (22 Teeth)
P8224 (24 Teeth)
P8226 (26 Teeth)
P8230 (30 Teeth)
Rear sprocket Longlife
Extra sturdy sprockets with 1 mm wider teeth. The Longlife sprockets are designed for use with ½”x 1/8 chains with a total width of up to 8 mm. Use only in combination with X101 Longlife chains. Available in 2 sizes.
P8226L (26 Teeth)
P8230L (30 Teeth)
CT2 Universal chain tensioner
Dual roller chain tensioner, compatible with Pinion P- and C-line gearboxes. The CT2 chain tensioner is designed for use with X1 and X101 Longlife chains. Mounting plate P8553 required.
P8552
P8552L (Longlife)
BT1 universal belt tensioner
The Pinion BT1 Universal Belt Tensioner is designed for use with Gates Carbon Drive CDX and CDN belts on bicycles with or without an electric motor in the rear hub. It is compatible with all P- and C-line gearboxes.
P8555
E1 Chain
Chain developed in cooperation with KMC for use on Singlespeed bikes with Pinion gearboxes.
P8540
E101 Chain
Singlespeed chain developed in cooperation with KMC especially for use with Pinion drivetrains and Longlife sprockets. Spacers for chain tensioner rollers included.
P8540L
Gates CDX belt
Gates Carbon Drive belt, colour black. Available in different lengths.
P8571 (111 Teeth, 1221 mm)
P8573 (113 Teeth, 1243 mm)
P8575 (115 Teeth, 1265 mm)
P8578 (118 Teeth, 1298 mm)
Gates CDX pulley
For mounting on the gearbox. Material: stainless steel, CDX Centertrack design.
P8132 (32 Teeth)
P8133 (39 Teeth)
Gates SL pulley
For mounting on the gearbox. Material: Aluminium, CDX Centertrack design. Available in 2 sizes.
P8138 (32 Teeth)
P8139 (39 Teeth)
Gates rear pulley
Rear pulley with 9-spline mount. Material: Stainless steel, CDX Centertrack design. Available in 4 sizes.
P8254 (24 Teeth)
P8256 (26 Teeth)
P8258 (28 Teeth)
P8250 (30 Teeth)
Gates RNM Snubber
Belt snubber for securing the Gates timing belt at the rear sprocket.
P8400 (short, up to 24 Teeth)
P8405 (long, 28-39 Teeth)
Chain whip
Tool for standard and Longlife chain sprockets.
P9522
SPIDER
Spider gearbox
CNC-machined 4-arm spider made of 7075 aluminium. Bolt circle diameter 104 mm.
P8100
Spider gearbox fatbike
High strength, CNC-machined 4-arm spider made of 7075 aluminium. Bolt circle diameter 104 mm.
P8105
Spider rear wheel
CNC-machined 4-arm spider made of 7075 aluminium. Bolt circle diameter 104 mm.
P8200
DS2 Rotary Shifter
The DS2 shift lever is compatible with all P- and C-line gearboxes and is suitable for left- and right-hand installation. Ergonomic cable routing and tool-free cable adjustment for a tidy look.
DS2 Rotary Shifter
The DS2 shift lever is compatible with all P- and C-line gearboxes and is suitable for left- and right-hand installation. Ergonomic cable routing and tool-free cable adjustment for a tidy look.
P5560 (DS2.18 black)
P5561 (DS2.12 black)
P5562 (DS2.9 black)
P5563 (DS2.6 black)
SHIFTER COVER DS2
2-compound grip, incl. bolts.
P5953
Gear cables
Set consisting of 2 x shift cables, Ø 1.1 mm, length 155 cm, with 4 nipples.
P8957
Number ring, anodised
Anodised to match gearbox colours, laser-marked shift scale ring made of aluminium
| 18 | 12 | 9 | 6 | |
| P5900 | P5910 | P5920 | P5940 | Black |
| P5900L | P5910L | P5920L | P5940L | Left/Black |
| P5900i | P5910i | P5920i | P5940i | Invers/Black |
| P5901 | P5911 | P5921 | Silver | |
| P5902 | P5912 | P5922 | Blue | |
| P5903 | P5913 | P5923 | Red | |
| P5904 | P5914 | P5924 | Orange | |
| P5905 | P5915 | P5925 | Green | |
| P5906 | P5916 | P5926 | Gold | |
| P5907 | P5917 | P5927 | Titanium | |
| P5908 | P5918 | P5928 | Purple |
Gearbox Accessories
Universal gearbox pulley
The universal gearbox pulley is compatible with all Pinion P- and C-line gearboxes. Standard gear cables with 1.1 mm cable thickness and 4 x 4 mm nipple size are used. No tools are required for assembly.
P8954
Shift cable set
Set for universal gearbox pulley. Consisting of 2 pcs. shift cables, 2 pcs. housings, 4 pcs. end caps, 2 pcs. shift cable clamps, 1 pcs. 1.5 mm hex bolt.
P8958
Shift box set C-line
Pre-assembled set, consisting of 1 x gearbox ring, 1 x universal cable pulley, 2 x shift cables, 3 x fixing bolts.
P8970
Gearbox cover P-line
Aluminium gearbox cover, black anodised, incl. bolts.
P8955
Gearshift cover C1.12
Gearbox cover made of fibre-reinforced plastic with C1.12 badge.
P8971
Gearbox cover C1.9
Gearbox cover made of fibre-reinforced plastic with C1.9 badge.
P8972
Gearbox cover C1.6
Gearbox cover made of fibre-reinforced plastic.
P8973
Protective film C-line
Protective, adhesive film, C-line, anthracite
P8980
Starter-kit
Get started now with Pinion!
At trade shows and events, the Pinion Demo Gearbox is the crowd puller!
Get the silent salesman also in your store!
The starter-kit consists of:
– Pinion Demo Gearbox C1.12 or P1.18
– Workshop-kit (Spare Parts Box, Lockring Tool, div. Spare Parts)
PINION ORIGINAL
STARTER-Kit
Get started now with Pinion!
At trade shows and events, the Pinion Demo Gearbox is the crowd puller!
Get the silent salesman also in your store!
The starter-kit consists of:
– Pinion Demo Gearbox C1.12 or P1.18
– Workshop-kit (Spare Parts Box, Lockring Tool, div. Spare Parts)
Spare Parts, Tools, and Workshop
Oil service kit (60 ml)
Complete kit consisting of 60 ml gear oil, oil syringe, hose, and threaded connector for a clean oil change. For all Pinion gearboxes.
P8903
All-season gear oil (1000 ml)
Bulk, workshop size gear oil. Please order oil service kit with syringe and connector (P8903) separately.
P8901
Spare parts box
High-quality plastic box with original bolts and spare parts.
Request individual refill sets via sales@pinion.eu.
P8960
Lockring Tool SL
For changing chains and sprockets. Can be used with 1/2″ torque spanner ensuring compatibility with a wide range of common tools.
P9511
Torque screwdriver
For shift cable clamps. Adjustable from 0.3 to 1.2 Nm.
P9517
Fitting sleeve pliers
For pressing back the fitting sleeves, enabling easier mounting of the gearbox in the frame.
P9515
PINION T-SHIRTS
“Driveshaft” T-shirt, white
T-shirt in loose casual style. 100 % cotton, ring-spun and combed, 160 g/m².
Produced according to Oeko-Tex 100 Standard. “Made in Germany” of course!
Size: S, M, L, XL.
P8001
“Driveshaft” T-shirt, anthracite
T-shirt in loose casual style. 100 % cotton, ring-spun and combed, 160 g/m².
Produced according to Oeko-Tex 100 Standard. “Made in Germany” of course!
P8052 (Ladies: XS, S, M, L)
P8002 (Mens: S, M, L, XL)
“Driveshaft” T-shirt, blue
T-shirt in loose casual style. 100 % cotton, ring-spun and combed, 160 g/m².
Produced according to Oeko-Tex 100 Standard. “Made in Germany” of course!
P8050 (Ladies: XS, S, M, L)
P8000 (Mens: S, M, L, XL)